3M™ High Flow Series Filter Housing

  • Saatavilla olevat vaihtoehdot
  • | Valitse tuotekoodien tuotevaihtoehdot.

3M High Flow Series Filter Housings are 33% to 50% smaller than competitively sized housings for a given flow rate

Single Cartridge Housings available for 10 in, 40 in and 60 in High Flow Cartridges

Robust cartridge centre-post design - Eliminates bulky support plates providing easy access to housing internals

Näytä enemmän tietoja

Tuotetiedot

Yksityiskohdat

Tärkeimmät ominaisuudet
  • 3M High Flow Series Filter Housings are 33% to 50% smaller than competitively sized housings for a given flow rate
  • Single Cartridge Housings available for 10 in, 40 in and 60 in High Flow Cartridges
  • Robust cartridge centre-post design - Eliminates bulky support plates providing easy access to housing internals
  • Hinged cover for easy filter cartridge change-outs
  • ASME Code design meets high quality and performance standards

3M™ High Flow Series Filter Housings are specifically designed to deliver all of the filtration benefits in a compact footprint. These housings are available in standard designs, as well as customizable configurations to suit your specific needs. All standard 3M high flow series filter housings are designed, manufactured, tested, and code stamped in accordance with ASME Section VIII, Division 1.

Pressure Equipment Directive 2014/68/EU: 3M High Flow housings are fully compliant with and built to PED 2014/68/EU Article 4.3 “Sound Engineering Practice” as standard. ATEX Directive 2014/34/EU The 3M High Flow Coreline housings are ATEX approved as standard for use in ATEX condition II 2 GD c IIC/IIIC. Marking and documentation The housings are clearly marked and delivered with a EN10204 Certificate of Conformity 2.2. The user of these housings must ensure that they are used in compliance with the requirements of these PED and ATEX directives at all times, and in accordance with the instruction manual supplied. Food Contact Directive (EC) 1935/2004 The housings are constructed from 316 and 316L stainless steel (wetted parts in contact) and delivered with O-rings that are compliant to FDA (there are no other non-316 parts in contact). Design In addition to the standard Coreline housing range described here, 3M High Flow System Housings can be built upon request to a wide range of specifications and design and construction standards. These routinely include PED Category IV and for use with Hazardous (Group 1) liquids and Gas/Vapour. Design and constructions codes can include (but are not limited to) EN13445, AD Merkblatter, ASME Div VIII & U Stamp and CODAP. Materials can include in addition to 316 (but not limited to) 304 and Uranus B6 Super Duplex steels

Ota meihin yhteyttä. Olemme täällä sinua varten.

Tarvitsetko apua löytääksesi oikean tuotteen projektiisi? Ota meihin yhteyttä, jos tarvitset tuotetietoja, teknisiä tai sovelluksiin liittyviä neuvoja tai haluat tehdä laajemmin yhteistyötä 3M:n teknisen asiantuntijan kanssa ( ).

Lähetä meille viesti

Kiitos esittämästänne pyynnöstä 3M:lle. Lomakkeessa antamianne tietoja tullaan hyödyntämään pyyntöön vastattaessa. Pyynnöstä riippuen vastaus voidaan toimittaa sähköpostilla tai puhelimitse 3M:n edustajan tai valtuutetun yhteistyökumppanin toimesta, joka käsittelee henkilötietojanne 3M:n tietosuojakäytäntöjen mukaisesti.

  •  
  •  
  •  
  •  
  •  
  • 3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers. Please be aware that this information may be stored on a server located in the U.S. If you do not consent to this use of your personal information, please do not use this system.

  • Lähetä viesti

Kiitos yhteydenotostasi 3M:lle

Olemme vastaanottaneet viestisi ja tarkastelemme nyt tiedusteluasi
Edustajamme ottaa sinuun yhteyttä puhelimitse tai sähköpostilla

An error occurred.