1. Suomi
  2. Kaikki 3M tuotteet
  3. Suodattimet
  4. Suodatinpatruunat ja -aineet
  5. Metallisuodattimet
  6. 3M™ CUNO™ Metal Screen Filter Cartridge, Coreline MSL1D6D360 A1063120, NBR, 316L, 1/Case

3M™ CUNO™ Metal Screen Filter Cartridge, Coreline MSL1D6D360 A1063120, NBR, 316L, 1/Case

3M ID 7000075888UPC 04046719502547
  • Strong mesh construction withstands high pressure differentials across the cartridge for filtration of high viscosity fluids
  • Elements can be cleaned chemically or ultrasonically and reused
  • Ideal for heavy viscosity liquids requiring high differential pressures to achieve specified flow rates
 Lisää
Näytä kaikki tiedot
Lisätiedot
Mikroniluokitus
360 μm
Tuotesarjat
MS
Tuotteen tiedot
  • Strong mesh construction withstands high pressure differentials across the cartridge for filtration of high viscosity fluids
  • Elements can be cleaned chemically or ultrasonically and reused
  • Ideal for heavy viscosity liquids requiring high differential pressures to achieve specified flow rates

3M™ CUNO™ Metal Screen Filter Cartridges are made from stainless steel wire cloth for controlled particle removal efficiency. Our cartridges are fitted with a screen and a perforated internal support cylinder attached to end caps equipped with replaceable gaskets.

3M™ CUNO™ Metal Screen Filter Cartridges deliver effective, consistent filtration of fluids where either high viscosity, high temperature or corrosive properties necessitate a stainless steel construction.

Standard range
Our cartridges are manufactured from 316 stainless steel and fitted with a screen and a perforated internal support cylinder. A variety of end-cap fittings are available to provide compatibility with a wide range of application needs. For ease of maintenance they can be cleaned using a variety of methods, including back flushing, chemical cleaning and ultrasonic cleaning. Standard cartridges have a plain, unpleated media.

Grades
They’re available in a range of 14 filtration grades that cover from 3 microns absolute up to 1,000 microns nominal. These are available in Double Open Ended (DOE) and heights 1 and 2, configuration with Nitrile of PTFE Flat Gasket equipped end caps, also in heights 1 and 2.

Range extensions
The standard range is readily extendable to include further options such as heights 3 and 4, and Single Open Ended configurations (with Type 222 or 226 end caps) and a variety of replaceable gasket materials. A threaded NPT option is also available.

Special builds
3M SPSD Hardware team has extensive experience designing and supplying special metal screen cartridges. These can include pleated media for greater surface area and a perforated, protective outer sheet.

Please contact your local SPSD representative for further information.

Ota yhteyttä

Lähetä meille viesti

Kiitos esittämästänne pyynnöstä 3M:lle. Lomakkeessa antamianne tietoja tullaan hyödyntämään pyyntöön vastattaessa. Pyynnöstä riippuen vastaus voidaan toimittaa sähköpostilla tai puhelimitse 3M:n edustajan tai valtuutetun yhteistyökumppanin toimesta, joka käsittelee henkilötietojanne 3M:n tietosuojakäytäntöjen mukaisesti.

  •  
  •  
  •  
  •  
  •  
  • 3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers. Please be aware that this information may be stored on a server located in the U.S. If you do not consent to this use of your personal information, please do not use this system.

  • Lähetä viesti

Kiitos yhteydenotostasi 3M:lle

Olemme vastaanottaneet viestisi ja tarkastelemme nyt tiedusteluasi
Edustajamme ottaa sinuun yhteyttä puhelimitse tai sähköpostilla

An error occurred.